
A buckle on a life jacket has two jobs that pull against each other. It must hold when a person is hauled from the water by the jacket, and it must open at once when the wearer needs it off.
What is the difference between a side-release and a quick-release buckle?
A side-release buckle is named for how it opens; a quick-release buckle is named for how fast. A side-release buckle has a male tongue with two sprung prongs that click into a female housing; squeezing the prongs at the sides frees it. A quick-release buckle is any buckle meant to open in one quick action, and on life-jacket belts that is often a side-release design too. So the useful question is not which shape, but which load the buckle is rated for and which standard it is tested to.
In MM’s range the two are listed differently. The MMB42 is a heavy side-release buckle for life-jacket webbing, with a breaking load over 3000 N, tested to ISO 12402-7:2006/Amd 1:2011, and it has IRS type approval. The MMQRB-02 and MMQRB-03 are quick-release buckles for life-jacket webbing, and they name ISO 12402-8 and the SOLAS LSA Code.


What does a breaking load over 3000 N mean?
It means the buckle held more than 3000 N in its test without breaking. A force of 3000 N is roughly the pull of three hundred kilograms hanging from the closed buckle. A belt buckle rarely sees that in use, but a jacket used to haul a heavy, waterlogged person over a gunwale puts a sudden load on its closures, and a buckle rated well above the wearer’s weight leaves a margin for that snatch.
Work vests have closures that take load too. MM’s MMWV has a heavy-duty fully encircling belt and chest strap, with a crotch strap fitted as standard.
What do ISO 12402-7 and ISO 12402-8 cover?
ISO 12402 is the international standard for personal flotation devices, in parts. Parts 2 to 5 set the performance levels, from 275 N down to 50 N, and part 6 covers special-purpose devices. Part 7 sets the minimum construction and performance requirements, with test methods, for the materials and components a PFD is built from, such as sewing thread, fabric, webbing and foam. Part 8 sets the safety requirements and test methods for accessories used with a PFD. MM’s MMLJW whistle, for one, is tested for sound to part 8.
Both parts were revised in 2020; the MMB42’s breaking load and the MMLJW’s sound figure are to the 2006 editions with their 2011 amendments. When a tender names an edition, check that the part’s papers name the same one. A standard sets the test, not the approval: whether a buckle is accepted on a SOLAS jacket is decided by the jacket’s type approval.
Where is each buckle used?
- Load-bearing closures on SOLAS and commercial life jackets: the belt or strap that holds the jacket on the body when a person is lifted from the water. This is where a rated breaking load matters, and where the MMB42’s over 3000 N and IRS type approval fit.
- Adjustable belts on jacket-type PFDs and work vests: several belts round the body, each closed and opened many times a day. MM’s STERN, SUMO, Stellar and Sea Horse jackets, for example, have three webbing belts on quick-release buckles with clip-slider holders.
- Crotch and leg straps: a short strap that stops the jacket riding up, opened every time the jacket comes off.
- Spares: a cracked or worn buckle on a jacket in service, replaced like for like.
How do you choose a replacement buckle?
- Match the webbing width and the slider, so the belt threads and holds as it did.
- Match the job: a load-bearing closure needs a buckle with a breaking load and the approval to go with it.
- Check the approval: on a type-approved jacket, ask the approval holder whether the replacement is accepted, as the spares post explains.
- Test it fitted: it clicks shut, holds when the belt is pulled hard, and opens with one hand.
What wears out a buckle?
Sun, salt and being trodden on. Plastic buckles left in direct sun lose their spring over time; sand and salt crystals stop the prongs seating; and a jacket dropped on deck and stood on can crack a housing. Rinse buckles with fresh water after use at sea, store jackets out of the sun, and check at each monthly inspection that every buckle clicks home and releases cleanly.

Heavy Side Release Buckle – MMB42
Model MMB42

Quick Release Buckle – MMQRB-02
Model MMQRB-02

Quick Release Buckle – MMQRB-03
Model MMQRB-03
Send us the buckle model or a photograph of the old one, the webbing width and the quantity: Request a quote.



Vasai, Maharashtra