Care and inspection

Life jacket spares: replacing lights, whistles and buckles

Which life jacket parts can be replaced in service, MM’s MMLJL light, MMLJW whistle and buckles, the SOLAS light rule in brief, and the checks after fitting.

Post · · Figures reviewed · Reviewed by Mohsin Bhinderwala, Managing Partner

The MM MMLJL life jacket light: a white LED unit with a green and orange body on a black lanyard
The MMLJL life jacket light.

Many life jackets are taken out of service for the sake of a small part. A light whose battery has passed its date, a whistle lost from its lanyard or a cracked buckle can each fail an inspection, and each can be put right without replacing the jacket.

What can be replaced on a life jacket in service?

The fittings that clip, tie or thread on. The foam, the cover and the load-bearing seams are the jacket itself; if they fail, the jacket is replaced. The parts below are the usual spares.

Life jacket parts: what is usually replaced, and what is not.
PartReplace on board?Common reason
LightYes, if it clips or locks onBattery past its service life; cracked lens; lost
WhistleYes, tied on by its lanyardLost, cracked or will not sound
Buckle on a threaded beltYes, if the webbing threads throughCracked; will not latch or release
Buckle sewn into the webbingNo: needs re-stitching of a load seamAsk the jacket’s supplier
Foam, cover, seams, labelNoReplace the jacket

The lifespan post has the full inspection checklist and the signs that a jacket itself has to go.

Does a replacement part affect the jacket’s approval?

It can. A type approval covers the jacket as it was approved, with the parts it was approved with. Before fitting a different make or model of part to an approved jacket, check with the approval holder, usually the jacket’s supplier, that the part is accepted for that jacket, and keep their answer with the ship’s records. A like-for-like spare from the same supplier is the simplest way to stay inside the approval.

What does SOLAS ask of a life jacket light?

A white light of at least 0.75 cd for at least 8 hours, under LSA Code section 2.2.3; the lights post has the full rule beside the lifebuoy light’s.

MM’s MMLJL is a water-activated LED light on a lanyard that fits and locks to the life jacket and comes on by itself on contact with water. It gives 0.75 cd, and its lithium battery lasts 8 hours. Note the date each light is fitted, and replace it within the service life its instructions give.

Life Jacket Light – MMLJL, as listed in MM’s catalogue data.
SpecificationValue
ActivationWater-activated LED, operates on contact with water
BatteryLithium, 8 hours
Luminous intensity0.75 cd
FitFits and locks to the life jacket

Which whistle replaces a lost one?

A SOLAS life jacket carries a whistle secured by a lanyard, and any jacket should have one: a whistle carries further than a shout and costs the wearer far less breath. MM’s MMLJW is a bright orange ABS whistle, non-corrosive, over 105 dB to ISO 12402-8:2006/Amd 1:2011. It works either way up, sounds in air straight after immersion, and has IRS type approval. It also fits immersion suits and life rafts, and a tether line can be attached.

Which buckles does MM offer as spares?

Two kinds for life-jacket webbing. The MMB42 is a heavy side-release buckle with a breaking load over 3000 N, tested to ISO 12402-7:2006/Amd 1:2011, with IRS type approval. The MMQRB-02 and MMQRB-03 are quick-release buckles that name ISO 12402-8 and the SOLAS LSA Code. The buckles post explains where each is used.

Which spares are worth keeping on board?

A few of each part the jackets on board use, matched to those jackets. Lights need the most planning, because every light’s battery has a service life, and a set of jackets bought together reaches the end of it together. Whistles go missing when lanyards chafe through, and buckles crack when jackets are dropped or stood on. With spares in the locker, a jacket that fails the monthly check can be put right the same day instead of being taken out of service until a part arrives. Write each light’s fitting date in the log, so the next replacements can be ordered before they are due.

What should you check after fitting a spare?

  • Light: locked to its holder where the jacket’s instructions place it, on the upper chest or shoulder so it shows above the water; the lanyard attached; the fitting date noted in the log.
  • Light test: tested the way its instructions say.
  • Whistle: tied on by its lanyard, stowed where the wearer can reach it with the jacket fastened, and it sounds.
  • Buckle: webbing threaded the right way through the slider, with the free end long enough not to slip out; the buckle clicks shut and holds when the belt is pulled hard.
  • Release: the buckle opens cleanly with one hand.
  • Record: the part, the date and the jacket it went on, entered in the vessel’s maintenance log for the next monthly inspection.

This is general practice. On a SOLAS ship or any surveyed vessel, follow the jacket supplier’s instructions and the survey’s requirements, which come first.

Tell us the jacket model, the parts and the quantity for each, and we will confirm what fits: Request a quote.

Sources: IMO, SOLAS 1974, IMO Resolution MSC.48(66), the LSA Code.