Care and inspection

Life jacket inspection: a monthly checklist and log

How often SOLAS says life jackets are inspected, what to check on each jacket, when to take one out of service, and what a log should record.

Post · · Figures reviewed · Reviewed by Mohsin Bhinderwala, Managing Partner

A lifeguard holding an MM life jacket, stepping aboard a boat near the shore
A lifeguard holding an MM life jacket, stepping aboard a boat.

A life jacket that has hung in a locker through a monsoon can look fine from the door and still fail in the water. An inspection is the habit that finds the cracked buckle, the flat light battery or the faded cover before anyone needs the jacket.

How often must life jackets be inspected?

On a ship under SOLAS, every life jacket is inspected once a month. Regulation III/20.7 requires all life-saving appliances to be inspected monthly, using the ship’s maintenance checklist, to make sure they are complete and in good order, and a report of the inspection is entered in the log-book. Regulation III/20.2 sets the standard the inspection protects: before the ship leaves port and throughout the voyage, every life-saving appliance is in working order and ready for immediate use.

Inflatable life jackets need more than a look. Regulation III/20.8 requires them to be serviced at intervals of no more than 12 months, at an approved servicing station; where that is impracticable, the administration may extend the interval to 17 months.

Who sets the inspection interval.
Vessel or useIntervalSet by
Ships under SOLASMonthly inspection, entered in the log-bookSOLAS regulation III/20.7
Inflatable jackets on SOLAS shipsServicing at no more than 12 months (17 if the administration extends it)SOLAS regulation III/20.8
Fishing, inland, ferry and tourism boatsAs the vessel’s flag, survey or licence requiresThe authority the boat is registered or licensed with
Every wearer, every vesselBefore each useGood practice

For boats outside SOLAS, the authority that registers, surveys or licenses the boat decides how often its jackets are inspected, so no single interval fits every fleet. Even where none is written down, checking once a month takes a crew little time, and jackets kept on an open deck in the tropics wear faster than the calendar suggests.

What should the wearer check before each use?

  • The jacket is the right size for the wearer, by the weight range on its label.
  • Every buckle closes with a click and the straps tighten without slipping.
  • The cover has no open tear and the foam panels feel firm.
  • The whistle is tied on.
  • The light is in place, where one is fitted.
  • On an inflatable jacket, the indicator shows the firing head is armed and the service date has not passed.

How to put the jacket on and fasten it is set out in how to wear a life jacket.

What does the monthly inspection cover on each jacket?

Life jacket inspection checklist.
PartWhat to checkTake the jacket out of service if
CoverRips, split seams, fabric bleached pale by sunFoam shows through, or the colour no longer stands out on water
Buoyancy foamSqueeze each panel: it should spring back, whole and dryA panel has gone stiff, shrunk, broken up or soaked through
Webbing and stitchingFrayed or cut webbing, broken or rotted thread where straps join the jacketA strap or seam that carries load is damaged
BucklesFasten and open each one; look for hairline cracksA buckle is cracked or slips, and no approved spare is fitted
Reflective tapeOn every panel, edges stuck downTape is missing and cannot be replaced
WhistleOn its cord, and blow itMissing, and no spare is fitted
Light and batteryFitted, battery expiry date not passed, test it the way its maker’s instructions sayMissing or expired, and no spare is fitted
LabelModel, size or user weight, and the approval can all be readNo one can read what the jacket is or what it is approved to

What the label of a SOLAS jacket must show is set out in SOLAS life jacket requirements; the inspection only asks whether it can still be read.

Foam jackets

Most failures on a foam jacket are at the parts that carry load: buckles, webbing and the stitching that joins them.

Inflatable jackets

Check that the gas cylinder is fitted and screwed home, that the firing head’s indicator shows it is armed, that the bladder shows no damage through the cover, and that the service date has not passed. MM’s Saviour, for example, inflates from a 33 g CO2 cylinder, automatically in water, by its pull toggle or by mouth. Servicing is work for an approved servicing station, not for the crew.

When should a life jacket come out of service?

  • It fails a line in the checklist and the part cannot be replaced with an approved spare.
  • Diesel, petrol or oil has soaked into it; both damage the foam and the cover.
  • It has been through a real rescue or a heavy fall and has not been inspected since.
  • Its label can no longer be read.
  • An inflatable jacket is past its service date, or has fired and not been re-armed by a servicing station.

Mark a rejected jacket clearly and keep it apart from serviceable ones, so it is not put back on the rack by mistake. How long a jacket lasts, and how to store jackets so they keep, is covered in how long does a life jacket last.

What should a life jacket inspection log record?

A log is the record a surveyor or the next safety officer can read. One row per jacket per inspection is enough.

Life jacket inspection log: the fields to keep.
FieldWhat to write
Jacket ID or locationA number marked on the jacket, or the locker or station it lives in
Model and sizeAs printed on the jacket’s label
Date and inspectorThe date, and the name of the person who checked it
Cover, foam, webbing, buckles, tape, whistlePass or fail for each
LightPass or fail, and the battery’s expiry date
Inflatables onlyCylinder, indicator, and the next service date
ResultIn service, or out of service
ActionPart replaced, jacket replaced, or sent for servicing, with the date

If jackets carry a tag, it needs only four things: the date of the inspection, the inspector, the result and the date the next one is due.

Can you replace a part instead of the whole jacket?

Often, yes: lights, whistles and buckles wear out long before the foam does. On an approved jacket, fit a spare the approval accepts. A SOLAS jacket is approved with its components, so ask the supplier which light, whistle and buckle the approval covers. MM’s MMLJW whistle and MMB42 buckle both carry IRS type approval; the MMLJL light gives 0.75 cd for 8 hours.

Short of lights, whistles or buckles after an inspection? Request a quote with the model of each part and how many you need, or send the list on WhatsApp.

Source: IMO, SOLAS 1974, chapter III, regulation 20.